Stabilizer for running above 12”-class tricone or DTH hammer bit

Used – Stabilizer for running above 12”-class tricone or DTH hammer bit

• Around 10-3/4" OD Including Ribs (Barrel Itself Around
• 10" Plus Ribs Makes It Around 10-3/4" Outside Diameter)
• 15 Ft. Shoulder-To-Shoulder Length Including 3 Ft. Neck
• Wrench Flats On Top End
• 3-1/2" API Reg. Pin On Top End
• 7-5/8" API Reg. Box On Bottom End
• Located in Mifflinburg, PA (USA)