2022 Nordic Drill DRC-10 Crawler Drill Rig

1

California

Description

  • 2022-2023 Nordic Drill DRC-10 Crawler Drill Rig - Accepting Pre-Orders with 12-15 months lead time estimated

  • All in One Drilling Rig with Dual Rotary, Crawler Mounted Carrier, 12" Max Openings & Slide Angle Mast with Advantages Compared to a Conventional Air Rotary Drill:
  • Angle Slide Package: Allows Drilling Applications for Mining, RC (Reverse Circulation) Exploration, Anchors, Pilling, Geotechnical, Soil Samples, Etc.
  • Crawler: JOHN DEERE CRAWLER 85D Light Weight & Small means less damage to the drilling sites, allows set up on difficult terrains & tight access sites, and less preparation for set up and break down.
  • Dual Rotary: Allows Accuracy & Performance in Tough Overburden Conditions, Good Sampling & Screen Installations, Facilitates The Extraction of Casing, Easy to Operate & Cleanliness on Sites.
  • Safety: Offers Safe Drilling Methods, Provided of an Anti-Rotation System.TOP DRIVE :
  • STROKE : 16’ FT
  • HOIST : 31,000 LBS
  • HOIST SPEED : 74 FT / MIN
  • PULL DOWN : 23,500 LBS
  • TORQUE : 5,400 FT X LBS
  • ROTATION SPEED : 0 – 130 RPM
  • LOWER DRIVE (MAXIMUM OPENING 12 INCHES):
  • STROKE : 10’ FT
  • HOIST : 35,000 LBS
  • HOIST SPEED : 47 FT / MIN
  • PULL DOWN : 26,500 LBS
  • TORQUE : 10,750 FT X LBS
  • ROTATION SPEED : 0 – 17 RPM
  • MAST KEYS, TABLE WRENCH AND LIFTING TOOL
  • ENGINE: CAT C 7.1 @ 225 HP TIER 4 FINAL
  • QUAD BEAN 18 GPM WATER PUMP
  • SERVICE WINCH : 2,000 LBS
  • PIPE TUB : MADE FOR 40 X 31⁄2” PIPES
  • ANTI-ROTATION (SAFETY) ON THE TOP DRIVE
  • JOHN DEERE CRAWLER 85D
  • WEIGHT : APPROX. 30,000 LBS
  • ONE SET OF JAWS EITHER 5,6,8 OR 10
  • Options to add tooling at an extra cost:
  • OPTIONS: Value in CAD
  • 1 X 6 INCHES DISCHARGE SWIVEL $8,700
  • 1 X CYCLONE AND ON RIG SUPPORT $9,300
  • 1 X DISCHARGE HOSE SUPER DUTY $2,800
  • 1 X CUSTOM SET OF JAWS $5,500
  • 1 X SET OF JAWS 05 " 3 UNITS $2,800
  • 1 X SET OF JAWS 06 " 6 UNITS $4,900
  • 1 X SET OF JAWS 08 " 6 UNITS $4,600
  • 1 X SET OF JAWS 10 " 6 UNITS $4,500
  • 1 X ENGINE HEATER KIT, HEAT OIL TANK AND ENGINE $9,250
  • 1 X CASING CLAMPS $8,250
  • 1 X HYDROFRAC PUMP : 26 GPM @ 1800 PSI / 13 GPM @ 2900 PSI $16,900
  • 1 X REMOTE CONTROL $15,500
  • 1 X 225 AMP. HYDRAULIC WELDING MACHINE $11,500
  • 1 X 36” ANGLE SLIDE PACKAGE CONVERSION TO DRC-10-A $16,200
  • 1 X FRONT WINCH : Ti 5 - 12,300 LBS $21,850

  • View the 3 minute company video clip of the DRC-10-A drill rig innovation & operating on youtube link: https://www.youtube.com/watch?v=55lGtpJEMBg&feature=youtu.be

  • Manufactured in SE Region, Canada
  • Contact Us for Estimated Lead time and Terms of Purchase
  • East West Machinery & Drilling is a USA distributor with Nordic Drill


SALES QUOTATION TERMS AND CONDITIONS:


TAX & DUTIES

Quoted prices do not include any taxes or duties.

Any duties and/or taxes assessed by the territory of the Buyer are the responsibility

of the Buyer.


DELIVERY

Delivery timing is from receipt of signed contract and required deposit.

Quoted delivery is estimated, and actual dates will be confirmed at time of firm order.

All equipment is subject to prior.


TRAINING & START-UP

None


PAYMENT

Subject to credit approval at time of firm order.

50%+ deposit to confirm the order and balance due prior to Ex-works delivery.


ALL QUOTED PRICES INCLUDE

Standard warranty on Nordic Drill.

Components not manufactured by Nordic Drill are subject to the original equipment

manufacturer’s warranty policy.


NOTE

Unless otherwise stated, specifications are for a standard unit and are subject to

change without notice.

Performance specifications are theoretical maximums and do not include mechanical

or other efficiency losses. Actual performance may vary.

This Quotation is specific to the attached specification. Any deviations from, or

changes to, may result in a price change.

Specifications

ManufacturerNordic Drill
ModelDRC-10 Crawler Drill Rig
Year2022
ConditionNew
Stock Number12507
Angle slide packageAllows Drilling Applications for Mining, RC (Reverse Circulation) Exploration, Anchors, Pilling, Geotechnical, Soil Samples, Etc.
CrawlerJOHN DEERE CRAWLER 85D Light Weight & Small means less damage to the drilling sites, allows set up on difficult terrains & tight access sites, and less preparation for set up and break down.
Dual rotaryAllows Accuracy & Performance in Tough Overburden Conditions, Good Sampling & Screen Intallations, Facilitates The Extraction of Casing, Easy to Operate & Cleaninesss on Sites.
SafetyAnti-Rotation Top Drive
Stroke16' ft
Hoist35,000 lbs
Hoist speed47 ft/min
Pull down23,500 lbs
Pull down speed63 ft/min
Torque21,500 ft x lbs
Rotation speed0-9 RPM (or more options)
Maximum opening12" (can run 12" casing under the lower drive)
Sliding mast stroke36"
Welding machineHydraulic 225 AMP
Water pumpQuad Bean 18 GPM
Hydrofrac pump26 GPM @ 1800 psi / 13 GPM @ 2900 psi
Service winch2,000 lbs
Front winchM12 12,000 lbs
Pipe tub40 Pipes - 3-1/2"
Maxumum speed3,1 MPH
Weightapprox. 30,000 lbs
Options1 X 6 INCHES DISCHARGE SWIVEL $7,200
1 x hydrofrac pump26 GPM @ 1800 PSI / 13 GPM @ 2900 PSI $15,800
1 x front winchTi 5 - 12,300 LBS $15,600
StatusPre-Order